客运专线新建车站路基及排水设计与养护维修方式的探讨

本文根据秦沈客运专线新建车站排水设计在验交时存在的不同意见,从车站站型布置、路基结构、站线轨道标准、排水设计特点与既有养护维修方式等方面存在的问题进行分析、研究,探讨客运专线新建车站站型布置、路基结构,站线轨道标准、排水设计与站线养护维修方式的设计方案。     

杭州城市交通拥挤现状及对策

在分析杭州市交通供需现状的基础上,提出了规划多中心结构和混合功能区,以减少不必要的出行以及合理配置交通源,并对改善中心区交通提出切实可行的对策。     

芜湖长江三桥钢桁梁分层变幅法架设技术

芜湖长江三桥主桥为主跨588 m的双塔双索面斜拉桥,其钢主梁采用三角形桁式的双主桁布置,上层为板桁组合结构、下层为箱桁组合结构,采用分层变幅法进行钢主梁标准节段的悬臂架设。钢梁起吊设备选择整体底盘双臂杆结构,变幅范围为5~22 m的变幅式架梁吊机,站位于上弦杆节点处。钢梁采用“3+1”分层匹配法制造,运输船分层纵列运输至桥位。每个标准节段分2次吊装,先吊装下层节段(含腹杆),再吊装上层节段。节段对接时利用架梁吊机起落和变幅精确调整空间位置,打入一定数量的冲钉后即可松钩。2层吊装完成后进行节段间的高强度螺栓连接和焊接,然后架梁吊机向前走行,继续循环进行下一节段架设。分层变幅法架设技术利用变幅式架梁吊机将钢桁梁标准节段分下、上2层分别吊装,是继散拼法、桁片法、整节段法等之后钢桁梁架设方法的一个创新。     

功率循环测试中衬底焊接层的可靠性

基板与陶瓷衬底之间的焊层寿命通常利用IGBT模块的被动加热和冷却(热循环)来测试,但这种试验会引起焊层失效(分层)。实际应用中,IGBT和二极管芯片是主动被加热的,诸如焊线脱落等其它模式的失效也会限制使用寿命,通常可通过功率循环试验来评估这种应力的影响。本文通过功率循环试验来评估衬底焊层的失效,利用高循环周次的测试进行有效的衬底焊层热循环试验,其关键在于功率循环过程中焊层温度的预测。在温度波动不大的条件下,比较了被动热循环和主动功率循环时对焊接寿命的影响。     

AMT换挡品质的研究

电控机械式自动变速器（AMT）具有传动效率高、结构紧凑及工作可靠等优点。介绍了AMT换挡品质的定义及其影响因素，分析了几种影响因素之间的内在关系，并在此理论基础上寻求一种可获得最佳AMT换挡品质的方法。AMT按照其对发动机控制方式的不同，可分为柔性控制和刚性控制结构。     

路侧公交专用车道模式下右转交织长度建模

在设置路侧公交专用道的交叉口处,可通过划定交织区的方式允许右转车辆借用一定长度的公交专用道通行.合理规划公交车与右转车的交织区长度有利于提高借道右转的通行效率,减少在交织区前的排队车辆数从而降低道路混乱程度,保障公交车的专用路权.本文分析了公交站点影响下的公交车车头时距分布,建立了右转车穿越交织区长度计算模型,并结合实际调查数据进行了算例分析和模型验证.研究成果可为公交优先条件下的交叉口空间优化设计提供理论参考.     

Analytical and simulation approaches to understand combined effects of transit signal priority and road-space priority measures

Transit signal priority (TSP) may be combined with road-space priority (RSP) measures to increase its effectiveness. Previous studies have investigated the combination of TSP and RSP measures, such as TSP with dedicated bus lanes (DBLs) and TSP with queue jump lanes (QJLs). However, in these studies, combined effects are usually not compared with separate effects of each measure. In addition, there is no comprehensive study dedicated to understanding combined effects of TSP and RSP measures. It remains unclear whether combining TSP and RSP measures creates an additive effect where the combined effect of TSP and RSP measures is equal to the sum of their separate effects. The existence of such an additive effect would suggest considerable benefits from combining TSP and RSP measures. This paper explores combined effects of TSP and RSP measures, including TSP with DBLs and TSP with QJLs. Analytical results based on time-space diagrams indicate that at an intersection level, the combined effect on bus delay savings is smaller than the additive effect if there is no nearside bus stop and the traffic condition in the base case is under-saturated or near-saturated. With a near-side bus stop, the combined effect on bus delay savings at an intersection level can be better than the additive effect (or over-additive effect), depending on dwell time, distance from the bus stop to the stop line, traffic demand, and cycle length. In addition, analytical results suggest that at an arterial level, the combined effect on bus delay savings can be the over-additive effect with suitable signal offsets. These results are confirmed by a micro-simulation case study. Combined effects on arterial and side-street traffic delays are also discussed.     

一种舰船低频电磁干扰的整改方法与试验研究

为解决声呐系统的低频电磁干扰故障,基于电磁干扰三要素中的辐射耦合路径,提出了一种采用坡莫合金与波纹管相结合的电磁屏蔽整改方法。首先分析了电磁干扰的形成机制以及舰船平台上的常见类型,采用对比试验与电磁环境测试,掌握了此次电磁干扰的耦合路径;通过电磁屏蔽试验以及试验改进,验证了整改方法的可行性。在舰船上实施改进的整改方法,测试结果证明了该方法的有效性,解决了声呐系统的低频电磁干扰故障。     

A systematic analysis of multimodal transport systems with road space distribution and responsive bus service

A smart design of transport systems involves efficient use and allocation of the limited urban road capacity in the multimodal environment. This paper intends to understand the system-wide effect of dividing the road space to the private and public transport modes and how the public transport service provider responds to the space changes. To this end, the bimodal dynamic user equilibrium is formulated for separated road space. The Macroscopic Fundamental Diagram (MFD) model is employed to depict the dynamics of the automobile traffic for its state-dependent feature, its inclusion of hypercongestion, and its advantage of capturing network topology. The delay of a bus trip depends on the running speed which is in turn affected by bus lane capacity and ridership. Within the proposed bimodal framework, the steady-state equilibrium traffic characteristics and the optimal bus fare and service frequency are analytically derived. The counter-intuitive properties of traffic condition, modal split, and behavior of bus operator in the hypercongestion are identified. To understand the interaction between the transport authority (for system benefit maximization) and the bus operator (for its own benefit maximization), we examine how the bus operator responds to space changes and how the system benefit is influenced with the road space allocation. With responsive bus service, the condition, under which expanding bus lane capacity is beneficial to the system as a whole, has been analytically established. Then the model is applied to the dynamic framework where the space allocation changes with varying demand and demand-responsive bus service. We compare the optimal bus services under different economic objectives, evaluate the system performance of the bimodal network, and explore the dynamic space allocation strategy for the sake of social welfare maximization.     

信号交叉口行人二次过街下右转车通行能力与延误估计模型

在充分分析典型四相位交叉口行人二次过街设置前、后的行人流与右转车流冲突的前提下，以行人过街时间占有率和行人群到达分布作为分析指标，利用可插车间隙理论得出行人单向通行和双向通行条件下的右转车通行能力计算公式；根据行人流随机消散和集中消散的不同特征，应用随机分布理论推导出右转车穿越行人流的延误模型；并通过算例对比分析行人二次过街设置前、后右转车通行能力和延误的变化值。结果表明，除了在少数行人流量比较大的情况下， 行人二次过街的设置会小幅度减少右转车的延误；在其他大多数情况下，行人二次过街设置后， 右转车的通行能力将受到限制，延误增大，其中，平均通行能力降低了16.68%，平均延误时间增大 了21%，所以，当右转车交通需求较大时，需同时考虑行人和右转车的交通运行状态，优化设计是否采用行人二次过街，避免右转车超出极限忍耐时间而增大与行人冲突的概率。